ARTICLES
-----------------------------------------------------------------------------------------------------------------
2018
Güler, O., Çuvalcı, H., Gökdağ, M., Çanakçi, A., Çelebi, M.Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites(2018) Particulate Science and Technology, 36 (7), pp. 899-907
Aslan, M., Tufan, M., Küçükömeroğlu, T.Tribological and mechanical performance of sisal-filled waste carbon and glass fibre hybrid composites(2018) Composites Part B: Engineering, 140, pp. 241-249.
Dalmis, R., Cuvalci, H., Canakci, A., Guler, O., Celik, E.The Effect of Mechanical Milling on Graphite–Boron Carbide Hybrid Reinforced ZA27 Nanocomposites(2018) Arabian Journal for Science and Engineering, 43 (3), pp. 1113-1124.
Yilmaz, S.S., Tutuncu, E., Misirlioglu, Y., Kuçuk, A., Cuvalci, H., Aslan, M.Synthesis, charecterization of a new 16 A, S, C-HBPAE-b-PCL copolymers and the mechanical properties of the copolymer-cement composites(2018) Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, art. no. 111.
Altintig, E., Onaran, M., Sarı, A., Altundag, H., Tuzen, M.Preparation, characterization and evaluation of bio-based magnetic activated carbon for effective adsorption of malachite green from aqueous solution(2018) Materials Chemistry and Physics, 220, pp. 313-321.
Chopra, K., Tyagi, V.V., Pandey, A.K., Sari, A.Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications(2018) Applied Energy, 228, pp. 351-389.
Bağda, E., Sarı, A., Tuzen, M. Effective uranium biosorption by macrofungus (Russula sanguinea) from aqueous solution: equilibrium, thermodynamic and kinetic studies (2018) Journal of Radioanalytical and Nuclear Chemistry, 317 (3), pp. 1387-1397.
Bagda, E., Tuzen, M., Sari, A., Shemsi, A.M., Bukhari, A.A. Thermodynamics and kinetics of biosorption of vanadium with macrofungus (Hypholoma fasciculare) and determination by GFAAS(2018) Atomic Spectroscopy, 39 (4), pp. 170-177.
Sarı, A., Bicer, A., Al-Ahmed, A., Al-Sulaiman, F.A., Zahir, M.H., Mohamed, S.A.Silica fume/capric acid-palmitic acid composite phase change material doped with CNTs for thermal energy storage(2018) Solar Energy Materials and Solar Cells, 179, pp. 353-361.
A., Tyagi, V.V., Anand, S., Pandey, A.K., Sari, A., Al-Sulaiman, F.A.Energy storage by PCM for building applications(2018) Handbook of Energy Systems in Green Buildings, pp. 995-1023.
56f270b885ab299df6028d39085f83eaSarı, A., Bicer, A., Al-Sulaiman, F.A., Karaipekli, A., Tyagi, V.V.Diatomite/CNTs/PEG composite PCMs with shape-stabilized and improved thermal conductivity: Preparation and thermal energy storage properties(2018) Energy and Buildings, 164, pp. 166-175.
Saleh, T.A., Tuzen, M., Sarı, A.Polyamide magnetic palygorskite for the simultaneous removal of Hg(II) and methyl mercury; with factorial design analysis(2018) Journal of Environmental Management, 211, pp. 323-333.
Bozkurt, F., Köse, C., Sarı, A.An inverse approach for automatic segmentation of carotid and vertebral arteries in CTA(2018) Expert Systems with Applications, 93, pp. 358-375.
Bozkurt, F., Köse, C., Sari, A.Comparison of seeded region growing and random walk methods for vessel and bone segmentation in CTA images(2018) 2017 10th International Conference on Electrical and Electronics Engineering, ELECO 2017, 2018-January, pp. 561-567.
Kahraman Döğüşcü, D., Kızıl, Ç., Biçer, A., Sarı, A., Alkan, C.Microencapsulated n-alkane eutectics in polystyrene for solar thermal applications(2018) Solar Energy, 160, pp. 32-42.
Tuzen, M., Sarı, A., Saleh, T.A.Response surface optimization, kinetic and thermodynamic studies for effective removal of rhodamine B by magnetic AC/CeO2 nanocomposite(2018) Journal of Environmental Management, 206, pp. 170-177.
Parameshwaran, R., Sarı, A., Jalaiah, N., Karunakaran, R.Applications of Thermal Analysis to the Study of Phase-Change Materials(2018) Handbook of Thermal Analysis and Calorimetry, 6, pp. 519-572.
Sarı, A., Alkan, C., Bilgin, C., Bicer, A.Preparation, Characterization and Thermal Energy Storage Properties of Micro/Nano Encapsulated Phase Change Material with Acrylic-Based Polymer(2018) Polymer Science - Series B, 60 (1), pp. 58-68.
Sarı, A., Bicer, A., Karaipekli, A., Al-Sulaiman, F.A.Preparation, characterization and thermal regulation performance of cement based-composite phase change material(2018) Solar Energy Materials and Solar Cells, 174, pp. 523-529.
Pandey, A.K., Hossain, M.S., Tyagi, V.V., Abd Rahim, N., Selvaraj, J.A.L., Sari, A.Novel approaches and recent developments on potential applications of phase change materials in solar energy(2018) Renewable and Sustainable Energy Reviews, 82, pp. 281-323
Varol, T., Canakci, A., Ozsahin, S., Erdemir, F., Ozkaya, S.Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling(2018) Particulate Science and Technology, 36 (6), pp. 742-750.
Varol, T., Canakci, A., Ozkaya, S., Erdemir, F.Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites(2018) Particulate Science and Technology, 36 (3), pp. 312-323.
Varol, T., Canakci, A., Ozsahin, S.Prediction of effect of reinforcement content, flake size and flake time on the density and hardness of flake AA2024-SiC nanocomposites using neural networks(2018) Journal of Alloys and Compounds, 739, pp. 1005-1014.
Aslan, M., Kaya, M., Güler, O., Alver, Ü.Effect of fibre content on the mechanical properties of basalt fibre reinforced polylactic acid (PLA) composites(2018) Tekstil ve Konfeksiyon, 28 (1), pp. 66-71.
Öztürk, S., İcin, K., Öztürk, B., Topal, U., Karaağaç, Ö., Köçkar, H.The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd–Fe–B Permanent Magnet Powders(2018) Journal of Superconductivity and Novel Magnetism, 31 (9), pp. 3025-3041.
Öztürk, B., Topcu, A., Öztürk, S., Cora, Ö.N.Oxidation, electrical and mechanical properties of Crofer®22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy(2018) International Journal of Hydrogen Energy, 43 (23), pp. 10822-10833.
2019
Öztürk, S., İcin, K., Gençtürk, M., Göbülük, M., Topal, U., Svec, P.Surface and structural characterization of amorphous Fe,Co-based melt-spun ribbons subjected to heat treatment processes(2019) Journal of Non-Crystalline Solids, 522, art. no. 119592.
Güler, O., Erdemir, F., Çelebi, M., Çuvalcı, H., Çanakçı, A.Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites(2019) Results in Physics, 15, art. no. 102700.
Alver, Ü., Tascıoğlu, M.E., Güler, O., Aslan, M., Yazgan, A., Kaya, H., Duran, C., Çuvalcı, H., Bilgin, S.Optical and Dielectric Properties of PMMA/α-Fe2O3–ZnO Nanocomposite Films(2019) Journal of Inorganic and Organometallic Polymers and Materials, 29 (5), pp. 1514-1522
Yalçın, E.D., Çanakçı, A., Erdemir, F., Çuvalcı, H., Karabacak, A.H.Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy(2019) Arabian Journal for Science and Engineering, 44 (2), pp. 1437-1445.
Suresh Kumar, S., Uthayakumar, M., Thirumalai Kumaran, S., Varol, T., Canakci, A. Investigating the surface integrity of aluminium based composites machined by EDM(2019) Defence Technology, 15 (3), pp. 338-343.
Kahya, V., Karaca, S., Okur, F.Y., Altunışık, A.C., Aslan, M.Free vibrations of laminated composite beams with multiple edge cracks: Numerical model and experimental validation(2019) International Journal of Mechanical Sciences, 159, pp. 30-42.
Kalusuraman, G., Thirumalai Kumaran, S., Aslan, M., Küçükömeroğluc, T., Siva, I.Use of waste copper slag filled jute fiber reinforced composites for effective erosion prevention(2019) Measurement: Journal of the International Measurement Confederation, 148, art. no. 106950.
Kalusuraman, G., Siva, I., Aslan, M., Anandkumar, S., Satyanarayana, K.G. Evaluation of surface pre-treatments on the surface characteristics modifications in sponge gourd (Luffa Cylindrica) fibers(2019) Materials Research Express, 6 (9), art. no. 095106.
Dalu, M., Temiz, A., Altuntaş, E., Demirel, G.K., Aslan, M.Characterization of tanalith E treated wood flour filled polylactic acid composites(2019) Polymer Testing, 76, pp. 376-384.
Kalusuraman, G., Thirumalai Kumaran, S., Aslan, M., Mayandi, K.Mechanical properties of waste copper slag filled surface activated jute fiber reinforced composite(2019) Materials Research Express, 6 (12), art. no. 125347.
Saleh, T.A., Sarı, A., Tuzen, M.Carbon nanotubes grafted with poly(trimesoyl, m-phenylenediamine) for enhanced removal of phenol(2019) Journal of Environmental Management, 252, art. no. 109660.
T.A., Tuzen, M., Sari, A.Magnetic vermiculite-modified by poly(trimesoyl chloride-melamine) as a sorbent for enhanced removal of bisphenol A(2019) Journal of Environmental Chemical Engineering, 7 (6), art. no. 103436.
Ouikhalfan, M., Sari, A., Chehouani, H., Benhamou, B., Biçer, A.Preparation and characterization of nano-enhanced myristic acid using metal oxide nanoparticles for thermal energy storage(2019) International Journal of Energy Research, 43 (14), pp. 8592-8607.
K., Tyagi, V.V., Pathak, A.K., Pandey, A.K., Sari, A.Experimental performance evaluation of a novel designed phase change material integrated manifold heat pipe evacuated tube solar collector system(2019) Energy Conversion and Management, 198, art. no. 111896.
Sarı, A., Al-Ahmed, A., Bicer, A., Al-Sulaiman, F.A., Hekimoğlu, G. Investigation of thermal properties and enhanced energy storage/release performance of silica fume/myristic acid composite doped with carbon nanotubes(2019) Renewable Energy, 140, pp. 779-788.
A., Biçer, A., Hekimoğlu, G.Effects of carbon nanotubes additive on thermal conductivity and thermal energy storage properties of a novel composite phase change material(2019) Journal of Composite Materials, 53 (21), pp. 2967-2980.
Sarı, A., Bicer, A., Alkan, C., Özcan, A.N.Thermal energy storage characteristics of myristic acid-palmitic eutectic mixtures encapsulated in PMMA shell(2019) Solar Energy Materials and Solar Cells, 193, pp. 1-6.
Sarı, A., Sharma, R.K., Hekimoğlu, G., Tyagi, V.V.Preparation, characterization, thermal energy storage properties and temperature control performance of form-stabilized sepiolite based composite phase change materials(2019) Energy and Buildings, 188-189, pp. 111-119.
Sarı, A., Biçer, A., Alkan, C.Poly(styrene-co-maleic anhydride)-graft-fatty acids as novel solid–solid PCMs for thermal energy storage(2019) Polymer Engineering and Science, 59 (s2), pp. E337-E347.
Sezer, R., Bilen, A., Yilmaz, E., Ertürk, S., Arslan, C.Investigation of leaching characteristics of celestite concentrate in acidic media and SrCO3 production via precipitation](2019) Journal of the Faculty of Engineering and Architecture of Gazi University, 34 (3), pp. 1409-1416.
Sezer, R., Yilmaz, E., Ertürk, S., Arslan, C.Calcination of Strontium Carbonate in Rotary Kiln Furnace(2019) Minerals, Metals and Materials Series, pp. 591-597.
Sezer, R., Arslan, C.Mechano-chemical conversion of celestite in highly concentrated sodium carbonate media(2019) Physicochemical Problems of Mineral Processing, 55 (2), pp. 324-335.
Güler, O., Varol, T., Alver, Ü., Çanakçı, A. The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating (2019) Journal of Alloys and Compounds, 782, pp. 679-688.
Varol, T., Ozsahin, S.Artificial neural network analysis of the effect of matrix size and milling time on the properties of flake Al-Cu-Mg alloy particles synthesized by ball milling(2019) Particulate Science and Technology, 37 (3), pp. 381-390.
Yalçın, E.D., Çanakçı, A., Erdemir, F., Çuvalcı, H., Karabacak, A.H. Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy(2019) Arabian Journal for Science and Engineering, 44 (2), pp. 1437-1445.
Reddy, N.C., Koppad, P.G., Reddappa, H.N., Ramesh, M.R., Babu, E.R., Varol, T.Hot corrosion behaviour of HVOF sprayed Ni3Ti and Ni3Ti + (Cr3C2 + 20NiCr) coatings in presence of Na2SO4-40%V2O5 at 650 °c(2019) Surface Topography: Metrology and Properties, 7 (2), art. no. 025019, .
Alver, U., Kudret, A., Kerli, S. Effect of Ethanol on the Photovoltaic Performance of ZnO Based Dye Sensitized Solar Cells(2019) Crystallography Reports, 64 (7), pp. 1159-1164.
Kerli, S., Alver, Ü., Eskalen, H., Uruş, S., Soğuksu, A.K. Structural and Morphological Properties of Boron Doped V 2 O 5 Thin Films: Highly Efficient Photocatalytic Degradation of Methyl Blue(2019) Russian Journal of Applied Chemistry, 92 (2), pp. 304-309.
Kerli, S., Alver, Ü., Eskalen, H., Soğuksu, A.K.Electrochemical properties and photocatalytic activity of In2O3-Co3O4 thin films(2019) Comptes Rendus de L'Academie Bulgare des Sciences, 72 (3), pp. 327-332.
2020
Güler, O., Çelebı, M., Dalmış, R., Çanakçi, A., Çuvalci, H.Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance(2020) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (9), pp. 4632-4646.
Ayar, M.K., Guven, M.E., Burduroglu, H.D., Erdemir, F.Repair of aged bulk-fill composite with posterior composite: Effect of different surface treatments(2019) Journal of Esthetic and Restorative Dentistry, 31 (3), pp. 246-252.
Ayar, M.K.,Erdemir,F. Effect of operating light exposure on enamel bonding performances of universal adhesives(2020) Medziagotyra, 26 (3), pp. 352-357.
Canakcı, A., Ozkaya, S., Erdemir, F., Karabacak, A.H., Celebi, M.Effects of Fe–Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites(2020) Journal of Alloys and Compounds, 845, art. no. 156236.
Yalçin, E.D., Çanakçi, A.Corrosion and wear performance of ZA27/graphene/B4C hybrid nanocomposites produced by powder metallurgy(2020) Acta Metallurgica Slovaca, 26 (3), pp. 126-131.
Yilmaz, N., Baltaci, E., Baygin, O., Tüzüner, T., Ozkaya, S., Canakci, A.Effect of the usage of Er,Cr:YSGG laser with and without different remineralization agents on the enamel erosion of primary teeth(2020) Lasers in Medical Science, 35 (7), pp. 1607-1620.
Güler, O., Varol, T., Alver, Ü., Canakci, A.Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing(2020) Materials Today Communications, 24, art. no. 101153.
Kumar, S.S., Erdemir, F., Varol, T., Kumaran, S.T., Uthayakumar, M., Canakci, A.Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology(2020) International Journal of Lightweight Materials and Manufacture, 3 (2), pp. 127-135.
Karabacak, A.H., Çanakçı, A., Erdemir, F., Özkaya, S., Çelebi, M.Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites(2020) International Journal of Materials Research, 111 (5), pp. 416-423.
Al-Ahmed, A., Sarı, A., Mazumder, M.A.J., Salhi, B., Hekimoğlu, G., Al-Sulaiman, F.A., InamuddinThermal energy storage and thermal conductivity properties of fatty acid/fatty acid-grafted-CNTs and fatty acid/CNTs as novel composite phase change materials(2020) Scientific Reports, 10 (1), art. no. 15388.
Al-Ahmed, A., Sarı, A., Mazumder, M.A.J., Hekimoğlu, G., Al-Sulaiman, F.A., InamuddinThermal energy storage and thermal conductivity properties of Octadecanol-MWCNT composite PCMs as promising organic heat storage materials(2020) Scientific Reports, 10 (1), art. no. 9168.
Sahin, G., Aslan, A., Tuzen, M., Sarı, A.Removal of Cr ions from aquatic solutions using olive leaves as low-cost bio-sorbent(2020) Atomic Spectroscopy, 41 (6), pp. 256-262.
Sarı, A., Tyagi, V.V. Thermal energy storage properties and lab-scale thermal performance in cementitious plaster of composite phase change material for energy efficiency of buildings(2020) Environmental Progress and Sustainable Energy, 39 (6), art. no. e13455.
Tuzen, M., Sarı, A., Saleh, T.A.Synthesis, characterization and evaluation of carbon nanofiber modified-polymer for ultra-removal of thorium ions from aquatic media(2020) Chemical Engineering Research and Design, 163, pp. 76-84.
Bozkurt, F., Köse, C., Sarı, A.A texture-based 3D region growing approach for segmentation of ICA through the skull base in CTA(2020) Multimedia Tools and Applications, 79 (43-44), pp. 33253-33278.
Temiz, A., Hekimoğlu, G., Köse Demirel, G., Sarı, A., Mohamad Amini, M.H.Phase change material impregnated wood for passive thermal management of timber buildings(2020) International Journal of Energy Research, 44 (13), pp. 10495-10505.
Deka, P.P., Ansu, A.K., Sharma, R.K., Tyagi, V.V., Sarı, A.Development and characterization of form-stable porous TiO2/tetradecanoic acid based composite PCM with long-term stability as solar thermal energy storage material(2020) International Journal of Energy Research, 44 (13), pp. 10044-10057.
Sarı, A., Hekimoğlu, G., Tyagi, V.V., Sharma, R.K.Evaluation of pumice for development of low-cost and energy-efficient composite phase change materials and lab-scale thermoregulation performances of its cementitious plasters(2020) Energy, 207, art. no. 118242.
Naeemullah, Tuzen, M., Sarı, A., Turkekul, I.Influential bio-removal of mercury using Lactarius acerrimus macrofungus as novel low-cost biosorbent from aqueous solution: Isotherm modeling, kinetic and thermodynamic investigations(2020) Materials Chemistry and Physics, 249, art. no. 123168.
Tuzen, M., Saleh, T.A., Sarı, A., NaeemullahInterfacial polymerization of trimesoyl chloride with melamine and palygorskite for efficient uranium ions ultra-removal(2020) Chemical Engineering Research and Design, 159, pp. 353-361.
Saleh, T.A., Al-Ruwayshid, S.H., Sarı, A., Tuzen, M.Synthesis of silica nanoparticles grafted with copolymer of acrylic acrylamide for ultra-removal of methylene blue from aquatic solutions(2020) European Polymer Journal, 130, art. no. 109698.
Chopra, K., Tyagi, V.V., Pandey, A.K., Sharma, R.K., Sari, A.PCM integrated glass in glass tube solar collector for low and medium temperature applications: Thermodynamic & techno-economic approach(2020) Energy, 198, art. no. 117238.
Sarı, A., Ouikhalfan, M., Chehouani, H., Hekimoğlu, G., Bicer, A., Al-Ahmed, A., Al-Sulaiman, F.A., Tyagi, V.V.Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties, Cycling Stability, and Thermal Durability(2020) Polymer Engineering and Science, 60 (5), pp. 909-916.
Sarı, A., Biçer, A., Alkan, C.Thermal energy storage properties of polyethylene glycol grafted styrenic copolymer as novel solid-solid phase change materials(2020) International Journal of Energy Research, 44 (5), pp. 3976-3989.
Sarı, A., Hekimoğlu, G., Tyagi, V.V.Low cost and eco-friendly wood fiber-based composite phase change material: Development, characterization and lab-scale thermoregulation performance for thermal energy storage(2020) Energy, 195, art. no. 116983.
Ansu, A.K., Sharma, R.K., Tyagi, V.V., Sarı, A., Ganesan, P., Tripathi, D.A cycling study for reliability, chemical stability and thermal durability of polyethylene glycols of molecular weight 2000 and 10000 as organic latent heat thermal energy storage materials(2020) International Journal of Energy Research, 44 (3), pp. 2183-2195.
Ouikhalfan, M., Labihi, A., Belaqziz, M., Chehouani, H., Benhamou, B., Sarı, A., Belfkira, A.Stability and thermal conductivity enhancement of aqueous nanofluid based on surfactant-modified TiO2(2020) Journal of Dispersion Science and Technology, 41 (3), pp. 374-382.
Sarı, A., Saleh, T.A., Hekimoğlu, G., Tuzen, M., Tyagi, V.V.Evaluation of carbonized waste tire for development of novel shape stabilized composite phase change material for thermal energy storage(2020) Waste Management, 103, pp. 352-360.
Chopra, K., Pathak, A.K., Tyagi, V.V., Pandey, A.K., Anand, S., Sari, A.Thermal performance of phase change material integrated heat pipe evacuated tube solar collector system: An experimental assessment(2020) Energy Conversion and Management, 203, art. no. 112205, .
Erdemir, F., Varol, T., Çanakçi, A.Synthesis of SiC nanoparticles by central composite design response surface methodology directed mechanical milling(2020) Micro and Nano Letters, 15 (3), pp. 189-192.
Sezer, R., Hızlı, G., Bilen, A., Ertürk, S., Dışpınar, D., Arslan, C.Metallothermic Production of Aluminum–Strontium Master Alloy for Modification of Silicon(2020) Metallography, Microstructure, and Analysis, 9 (6), pp. 833-840.
Sezer, R., Bilen, A., Hızlı, G., Ertürk, S., Arslan, C.Effects of Furnace Slope and Rotational Speed on the Carbothermic Reduction of Celestite in a Laboratory-Scale Rotary Kiln Furnace(2020) Mining, Metallurgy and Exploration, 37 (4), pp. 1273-1278.
Türk, T., Alp, İ., Sezer, R., Arslan, C.Removal of arsenic from water using copper slag(2020) Journal of the Southern African Institute of Mining and Metallurgy, 120 (5), pp. 313-318.
Özen, İ., Çava, K., Gedikli, H., Alver, Ü., Aslan, M.Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores(2020) Thin-Walled Structures, 156, art. no. 106989.
Güler, O., Alver, Ü., Varol, T.Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing(2020) Journal of Alloys and Compounds, 835, art. no. 155278.
John, K.M., Kumaran, S.T., Senthil Kumar, K., Suresh Kumar, S., Aslan, M., Alver, Ü. Mechanical and vibrational behavior of twill woven carbon fiber reinforced composites(2020) International Polymer Processing, 35 (2), pp. 203-210.
Kerli, S., Alver, U., Göğebakan, M. Investigation of the Electrical Properties of Al85Y9Ni6 Metallic Glass and Formulation of the Results(2020) Glass Physics and Chemistry, 46 (2), pp. 189-193.
Öztürk, B., Gedikli, H., Kılıçarslan, Y.S.Erosive wear characteristics of E-glass fiber reinforced silica fume and zinc oxide-filled epoxy resin composites(2020) Polymer Composites, 41 (1), pp. 326-337.
Öztürk, S., Sünbül, S.E., Metoğlu, A., Önal, S., İçin, K.Characterisation of nickel–aluminium bronze powders produced by the planar flow casting method(2020) Materials Science and Technology (United Kingdom), 36 (16), pp. 1771-1784.
Öztürk, S., Sünbül, S.E., Metoğlu, A., İÇİN, K.Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method(2020) Tribology International, 151, art. no. 106519.
Sünbül, S.E., Öztürk, S., İçin, K.Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting(2020) Journal of Materials Engineering and Performance, 29 (9), pp. 6101-6107.
İçi̇n, K., Öztürk, S., Çakil, D.D., Sünbül, S.E.Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale(2020) Ceramics International, 46 (9), pp. 14150-14160.
Aslan, M., Kaymaz, E.G.Characterization of thick carbon/basalt hybrid fiber polyester composites with graphene nanoplatelets(2020) Materialpruefung/Materials Testing, 62 (1), pp. 12-18.
ÖZTÜRK, S., SÜNBÜL, S.E., İCİN, K.Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons(2020) Transactions of Nonferrous Metals Society of China (English Edition), 30 (5), pp. 1169-1182.
Öztürk, S., İçin, K., Gençtürk, M., Göbülük, M., Svec, P.Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons(2020) Journal of Non-Crystalline Solids, 527, art. no. 119745.
2021
Çelebi, M., Güler, O., Çanakçı, A., Çuvalcı, H.The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy(2021) Journal of Composite Materials, 55 (24), pp. 3395-3408.
Erdemir, F., Güler, O., Çanakçı, A.Electroless nickel-phosphorus coated expanded graphite paper: Binder-free, ultra-thin, and low-cost electrodes for high-performance supercapacitors(2021) Journal of Energy Storage, 44, art. no. 103364, .
Çevik, Z.A., Karabacak, A.H., Kök, M., Canakçı, A., Kumar, S.S., Varol, T.The effect of machining processes on the physical and surface characteristics of AA2024-B4C-SiC hybrid nanocomposites fabricated by hot pressing method(2021) Journal of Composite Materials, 55 (19), pp. 2657-2671.
Kumar, S.S., Varol, T., Canakci, A., Kumaran, S.T., Uthayakumar, M. A review on the performance of the materials by surface modification through EDM(2021) International Journal of Lightweight Materials and Manufacture, 4 (1), pp. 127-144.
Kahya, V., Okur, F.Y., Karaca, S., Altunışık, A.C., Aslan, M.Multiple damage detection in laminated composite beams using automated model update(2021) Structures, 34, pp. 1665-1683.
Kahya, V., Karaca, S., Okur, F.Y., Altunışık, A.C., Aslan, M.Damage Localization in Laminated Composite Beams with Multiple Edge Cracks Based on Vibration Measurements(2021) Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (1), pp. 75-87.
Sarı, A., Saleh, T.A., Tuzen, M.Development and characterization of polymer-modified vermiculite composite as novel highly-efficient adsorbent for water treatment(2021) Surfaces and Interfaces, 27, art. no. 101504.
Gencel, O., Hekimoğlu, G., Sarı, A., Sutcu, M., Er, Y., Ustaoglu, A.A novel energy-effective and carbon-emission reducing mortars with bottom ash and phase change material: Physico-mechanical and thermal energy storage characteristics(2021) Journal of Energy Storage, 44, art. no. 103325.
Hekimoğlu, G., Sarı, A., Arunachalam, S., Arslanoğlu, H., Gencel, O.Porous biochar/heptadecane composite phase change material with leak-proof, high thermal energy storage capacity and enhanced thermal conductivity(2021) Powder Technology, 394, pp. 1017-1025.
Singh, H.M., Tyagi, V.V., Kothari, R., Azam, R., Khare, P., Sari, A.Novel approach for harvesting of microalgal biomass using electric geyser waste material deposit as flocculant in coupling with poultry excreta leachate(2021) Bioresource Technology, 341, art. no. 125646.
Gencel, O., Sarı, A., Ustaoglu, A., Hekimoglu, G., Erdogmus, E., Yaras, A., Sutcu, M., Cay, V.V.Eco-friendly building materials containing micronized expanded vermiculite and phase change material for solar based thermo-regulation applications(2021) Construction and Building Materials, 308, art. no. 125062.
Saleh, T.A., Sarı, A., Tuzen, M.Development and characterization of bentonite-gum arabic composite as novel highly-efficient adsorbent to remove thorium ions from aqueous media(2021) Cellulose, 28 (16), pp. 10321-10333.
Singh, G., Tyagi, V.V., Chopra, K., Pandey, A.K., Sharma, R.K., Sari, A. Correction to: Energetic and exergetic assessment of two- and three-stage spray drying units for milk processing industry (Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2021), 43, 7, (359), 10.1007/s40430-021-03015-3)(2021) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (10), art. no. 450.
Tyagi, V.V., Chopra, K., Kalidasan, B., Chauhan, A., Stritih, U., Anand, S., Pandey, A.K., Sarı, A., Kothari, R.Phase change material based advance solar thermal energy storage systems for building heating and cooling applications: A prospective research approach(2021) Sustainable Energy Technologies and Assessments, 47, art. no. 101318.
Saleh, T.A., Tuzen, M., Sarı, A.Evaluation of poly(ethylene diamine-trimesoyl chloride)-modified diatomite as efficient adsorbent for removal of rhodamine B from wastewater samples(2021) Environmental Science and Pollution Research, 28 (39), pp. 55655-55666.
Singh, G., Tyagi, V.V., Chopra, K., Pandey, A.K., Sharma, R.K., Sari, A.Energetic and exergetic assessment of two- and three-stage spray drying units for milk processing industry(2021) Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (7), art. no. 359.
Döğüşcü, D.K., Hekimoğlu, G., Sarı, A.High internal phase emulsion templated-polystyrene/carbon nano fiber/hexadecanol composites phase change materials for thermal management applications(2021) Journal of Energy Storage, 39, art. no. 102674.
Hekimoğlu, G., Sarı, A., Kar, T., Keleş, S., Kaygusuz, K., Yıldırım, N., Tyagi, V.V., Sharma, R.K., Saleh, T.A.Carbonized waste hazelnut wood-based shape-stable composite phase change materials for thermal management implementations(2021) International Journal of Energy Research, 45 (7), pp. 10271-10284.
Ahmad, S., Kothari, R., Singh, H.M., Tyagi, V.V., Singh, B., Sari, A.Experimental investigation of microalgal harvesting with low cost bottom ash: Influence of temperature and pH with zeta potential and thermodynamic function(2021) Environmental Technology and Innovation, 22, art. no. 101376.
Singh, P., Sharma, R.K., Ansu, A.K., Goyal, R., Sarı, A., Tyagi, V.V.A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications(2021) Solar Energy Materials and Solar Cells, 223, art. no. 110955.
Sarı, A., Saleh, T.A., Hekimoğlu, G., Tyagi, V.V., Sharma, R.K.Microencapsulated heptadecane with calcium carbonate as thermal conductivity-enhanced phase change material for thermal energy storage(2021) Journal of Molecular Liquids, 328, art. no. 115508.
Hekimoğlu, G., Nas, M., Ouikhalfan, M., Sarı, A., Tyagi, V.V., Sharma, R.K., Kurbetci, Saleh, T.A.Silica fume/capric acid-stearic acid PCM included-cementitious composite for thermal controlling of buildings: Thermal energy storage and mechanical properties(2021) Energy, 219, art. no. 119588.
Hekimoğlu, G., Nas, M., Ouikhalfan, M., Sarı, A., Kurbetci, Ş., Tyagi, V.V., Sharma, R.K., Saleh, T.A.Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material(2021) Construction and Building Materials, 274, art. no. 122105.
Al-Ahmed, A., Mazumder, M.A.J., Salhi, B., Sari, A., Afzaal, M., Al-Sulaiman, F.A.Effects of carbon-based fillers on thermal properties of fatty acids and their eutectics as phase change materials used for thermal energy storage: A Review(2021) Journal of Energy Storage, 35, art. no. 102329.
Hekimoğlu, G., Sarı, A., Kar, T., Keleş, S., Kaygusuz, K., Tyagi, V.V., Sharma, R.K., Al-Ahmed, A., Al-Sulaiman, F.A., Saleh, T.A.Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties(2021) Journal of Energy Storage, 35, art. no. 102288.
Altıntıg, E., Yenigun, M., Sarı, A., Altundag, H., Tuzen, M., Saleh, T.A.Facile synthesis of zinc oxide nanoparticles loaded activated carbon as an eco-friendly adsorbent for ultra-removal of malachite green from water(2021) Environmental Technology and Innovation, 21, art. no. 101305.
Ahmad, S., Kothari, R., Pathak, V.V., Tyagi, V.V., Pandey, A.K., Sari, A.Response surface methodology–based extraction optimization with application of ZrCl4 as novel quenching agent for enhancement of bio-oil yield from Jatropha curcas and Chlorella pyrenoidosa(2021) Biomass Conversion and Biorefinery.
Erdemir, F., Tuzcu, E., Bilgin, S., Alver, Ü., Çanakçı, A.Influence of fluorine doping of zinc oxide on its electrochemical performance in supercapacitors(2021) Materials Chemistry and Physics, 259, art. no. 124033.
Bilgin, S., Güler, O., Alver, Ü., Erdemir, F., Aslan, M., Çanakçı, A.Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool(2021) Journal of the Australian Ceramic Society, 57 (1), pp. 263-273.
Güler, O., Varol, T., Alver, Ü., Biyik, S.The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating(2021) Advanced Powder Technology, 32 (8), pp. 2873-2890.
Güler, O., Varol, T., Alver, Ü., Kaya, G., Yıldız, F.Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methods(2021) Materials Today Communications, 27, art. no. 102205.
Öztürk, B., Topcu, A., Cora, Ö.N.Influence of processing parameters on the porosity, thermal expansion, and oxidation behavior of consolidated Fe22Cr stainless steel powder(2021) Powder Technology, 382, pp. 199-207.
Özen, İ., Gedikli, H., Öztürk, B.Improvement of solid particle erosion resistance of helicopter rotor blade with hybrid composite shield(2021) Engineering Failure Analysis, 121, art. no. 105175.
Varol, T., Güler, O., Akçay, S.B., Aksa, H.C.The effect of silver coated copper particle content on the properties of novel Cu-Ag alloys prepared by hot pressing method(2021) Powder Technology, 384, pp. 236-246.
Için, K., Öztürk, S., Sünbül, S.E.Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process(2021) Ceramics International, 47 (23), pp. 33897-33911.
Varol, T., Hacısalihoğlu, İ., Kaya, G., Güler, O., Yıldız, F., Aksa, H.C., Akçay, S.B.The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores(2021) Journal of Materials Engineering and Performance, 30 (7), pp. 5216-5226.
İÇİN, K., ÖZTÜRK, S., ÇAKIL, D.D., SÜNBÜL, S.E.Mechanochemical synthesis of SrFe12O19 from recycled mill scale: Effect of synthesis time on phase formation and magnetic properties(2021) Journal of Alloys and Compounds, 873, art. no. 159787.
Sünbül, S.E., İçi̇n, K., Şeren, F.Z., Şahin, Ö., Çakil, D.D., Sezer, R., Öztürk, S. Determination of structural, tribological, isothermal oxidation and corrosion properties of Al–Co–Cr–Fe–Ni–Ti–Cu high-entropy alloy(2021) Vacuum, 187, art. no. 110072.
2022
Topcu, A., Öztürk, B., Cora, Ö.N.Performance evaluation of machined and powder metallurgically fabricated Crofer®22 APU interconnects for SOFC applications(2022) International Journal of Hydrogen Energy, 47 (5), pp. 3437-3448.
Kocaman, M., Çuvalcı, H., Güler, O.Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement(2022) Fibers and Polymers, 23 (7), pp. 2017-2029.
Kocaman, M., Çuvalcı, H.The evolution of tribological properties of graphite and glass fiber reinforced novolac matrix hybrid composites(2022) Polymer Composites,
Karabacak, A.H., Çanakçı, A., Erdemir, F., Özkaya, S., Çelebi, M.Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles(2022) Silicon, 14 (14), pp. 8567-8579.
Canpolat, Ö., Çanakçı, A., Erdemir, F.Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing(2022) Materials Chemistry and Physics, 280, art. no. 125826.
Singh, P., Sharma, R.K., Goyal, R., Hekimoğlu, G., Sarı, A., Rathore, P.K.S., Tyagi, V.V.Development and characterization a novel leakage-proof form stable composite of graphitic carbon nitride and fatty alcohol for thermal energy storage(2022) Journal of Energy Storage, 55, art. no. 105761.
Yaras, A., Ustaoglu, A., Gencel, O., Sarı, A., Hekimoğlu, G., Sutcu, M., Erdogmus, E., Kaplan, G., Bayraktar, O.Y.Characteristics, energy saving and carbon emission reduction potential of gypsum wallboard containing phase change material(2022) Journal of Energy Storage, 55, art. no. 105685.
Gencel, O., Sarı, A., Kaplan, G., Ustaoglu, A., Hekimoğlu, G., Bayraktar, O.Y., Ozbakkaloglu, T.Properties of eco-friendly foam concrete containing PCM impregnated rice husk ash for thermal management of buildings(2022) Journal of Building Engineering, 58, art. no. 104961.
Gencel, O., Subasi, S., Ustaoglu, A., Sarı, A., Marasli, M., Hekimoğlu, G., Kam, E.Development, characterization and thermo-regulative performance of microencapsulated phase change material included-glass fiber reinforced foam concrete as novel thermal energy effective-building material(2022) Energy, 257, art. no. 124786.
Singh, P., Sharma, R.K., Khalid, M., Goyal, R., Sarı, A., Tyagi, V.V.Evaluation of carbon based-supporting materials for developing form-stable organic phase change materials for thermal energy storage: A review(2022) Solar Energy Materials and Solar Cells, 246, art. no. 111896.
Gencel, O., Balci, B., Bayraktar, O.Y., Nodehi, M., Sarı, A., Kaplan, G., Hekimoğlu, G., Gholampour, A., Benli, A., Ozbakkaloglu, T.The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete(2022) Journal of Building Engineering, 54, art. no. 104689.
Ouikhalfan, M., Sarı, A., Hekimoğlu, G., Gencel, O., Tyagi, V.V.Thermal energy storage properties, thermal conductivity, chemical/and thermal reliability of three different organic phase change materials doped with hexagonal boron nitride(2022) Surfaces and Interfaces, 32, art. no. 102176.
Saleh, T.A., Tuzen, M., Sarı, A.Effective antimony removal from wastewaters using polymer modified sepiolite: Isotherm kinetic and thermodynamic analysis(2022) Chemical Engineering Research and Design, 184, pp. 215-223.
Singh, G., Tyagi, V.V., Pandey, A.K., Goel, V., Sari, A.Comparative exergoeconomic analysis of single, two and three stage spray drying systems(2022) Journal of Thermal Analysis and Calorimetry, 147 (16), pp. 8947-8968.
Gencel, O., Hekimoglu, G., Sarı, A., Ustaoglu, A., Subasi, S., Marasli, M., Erdogmus, E., Memon, S.A.Glass fiber reinforced gypsum composites with microencapsulated PCM as novel building thermal energy storage material(2022) Construction and Building Materials, 340, art. no. 127788.
Göksu, H., Aydınlı, E., Hekimoğlu, G., Sarı, A., Gencel, O., Subaşı, S., Tozluoğlu, A.Activated carbon nanotube/polyacrylic acid/stearyl alcohol nanocomposites as thermal energy storage effective shape-stabilized phase change materials(2022) Surfaces and Interfaces, 31, art. no. 102088.
Saleh, T.A., Tuzen, M., Sarı, A., Altunay, N.Factorial design, physical studies and rapid arsenic adsorption using newly prepared polymer modified perlite adsorbent(2022) Chemical Engineering Research and Design, 183, pp. 181-191.
Ahmad, S., Iqbal, K., Kothari, R., Singh, H.M., Sari, A., Tyagi, V.V.A critical overview of upstream cultivation and downstream processing of algae-based biofuels: Opportunity, technological barriers and future perspective(2022) Journal of Biotechnology, 351, pp. 74-98.
Gencel, O., Nodehi, M., Hekimoğlu, G., Ustaoğlu, A., Sarı, A., Kaplan, G., Bayraktar, O.Y., Sutcu, M., Ozbakkaloglu, T.Foam Concrete Produced with Recycled Concrete Powder and Phase Change Materials(2022) Sustainability (Switzerland), 14 (12), art. no. 7458.
Sarı, A., Hekimoğlu, G., Karabayır, Y., Sharma, R.K., Arslanoğlu, H., Gencel, O., Tyagi, V.V.Capric-stearic acid mixture impregnated carbonized waste sugar beet pulp as leak-resistive composite phase change material with effective thermal conductivity and thermal energy storage performance(2022) Energy, 247, art. no. 123501.
Harja, M., Gencel, O., Sarı, A., Sutcu, M., Erdogmus, E., Hekimoglu, G.Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash(2022) Archives of Civil and Mechanical Engineering, 22 (2), art. no. 79.
Palanti, S., Temiz, A., Demirel, G.K., Hekimoğlu, G., Sarı, A., Nazari, M., Jebrane, M., Schnabel, T., Terziev, N.Bio-Based Phase Change Materials for Wooden Building Applications(2022) Forests, 13 (4), art. no. 603.
Gencel, O., Ustaoglu, A., Benli, A., Hekimoğlu, G., Sarı, A., Erdogmus, E., Sutcu, M., Kaplan, G., Yavuz Bayraktar, O.Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete(2022) Solar Energy, 236, pp. 51-62.
Chopra, K., Tyagi, V.V., Pandey, A.K., Popli, S., Singh, G., Sharma, R.K., Sari, A.Effect of simultaneous & consecutive melting/solidification of phase change material on domestic solar water heating system(2022) Renewable Energy, 188, pp. 329-348.
Ouikhalfan, M., Hekimoǧlu, G., Sari, A., Gencel, O., Tyagi, V.V.Metal Oxide Nanoparticle Dispersed-Polyethylene Glycol: Thermal Conductivity and Thermal Energy Storage Properties(2022) Energy and Fuels, 36 (5), pp. 2821-2832.
Hekimoğlu, G., Sarı, A., Önal, Y., Gencel, O., Tyagi, V.V., Aslan, E.Utilization of waste apricot kernel shell derived-activated carbon as carrier framework for effective shape-stabilization and thermal conductivity enhancement of organic phase change materials used for thermal energy storage(2022) Powder Technology, 401, art. no. 117291.
Gencel, O., Yaras, A., Hekimoğlu, G., Ustaoglu, A., Erdogmus, E., Sutcu, M., Sarı, A.Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance(2022) Energy and Buildings, 258, art. no. 111849.
Kothari, R., Pandey, A., Ahmad, S., Singh, H.M., Pathak, V.V., Tyagi, V.V., Kumar, K., Sari, A.Utilization of Chlorella pyrenoidosa for Remediation of Common Effluent Treatment Plant Wastewater in Coupling with Co-relational Study: An Experimental Approach(2022) Bulletin of Environmental Contamination and Toxicology, 108 (3), pp. 507-517.
Hekimoğlu, G., Sarı, A., Gencel, O., Tyagi, V.V.Thermal conductivity enhancement of silica fume based composite thermal energy storage material using different carbon nanomaterials(2022) Energy and Buildings, 257, art. no. 111789.
Tuzen, M., Sarı, A., Afshar Mogaddam, M.R., Kaya, S., Katin, K.P., Altunay, N.Synthesis of carbon modified with polymer of diethylenetriamine and trimesoyl chloride for the dual removal of Hg (II) and methyl mercury ([CH3Hg]+) from wastewater: Theoretical and experimental analyses(2022) Materials Chemistry and Physics, 277, art. no. 125501.
Azam, R., Kothari, R., Singh, H.M., Ahmad, S., Sari, A., Tyagi, V.V.Cultivation of two Chlorella species in Open sewage contaminated channel wastewater for biomass and biochemical profiles: Comparative lab-scale approach(2022) Journal of Biotechnology, 344, pp. 24-31.
Gencel, O., Harja, M., Sarı, A., Hekimoğlu, G., Ustaoğlu, A., Sutcu, M., Erdogmus, E., Kaplan, G., Bayraktar, O.Y.Development, characterization, and performance analysis of shape-stabilized phase change material included-geopolymer for passive thermal management of buildings(2022) International Journal of Energy Research.
Yaras, A., Nodehi, M., Ustaoglu, A., Arslanoglu, H., Sarı, A., Gencel, O., Ozbakkaloglu, T.Cleaner production of polyurethane (PU) foams through use of hydrodesulfurization (HDS) spent catalyst(2022) Environmental Science and Pollution Research.
Al-Ahmed, A., Sari, A., Khan, F., Al-Rasheidi, M., Hekimoğlu, G., Afzaal, M., Alsulami, A.A., Dafalla, H., Salhi, B., Alsulaiman, F.A.A Novel Layered Double Hydroxide and Dodecyl Alcohol Assisted PCM Composite with High Latent Heat Storage Capacity and Thermal Conductivity(2022) Journal of Thermal Science.
Hekimoğlu, G., Sarı, A.Shape stabilized attapulgite/myristic-palmitic acid composite PCM for thermal energy storage implementations in buildings(2022) Materials Today: Proceedings, 58, pp. 1350-1353.
Hekimoğlu, G., Sarı, A.A review on phase change materials (PCMs) for thermal energy storage implementations(2022) Materials Today: Proceedings, 58, pp. 1360-1367.
Coşanay, H., Selimefendigil, F., Öztop, H.F., Sarı, A.Experimental Analysis of Melting Behavior of Capric Acid (CA)–Stearic Acid (SA) Eutectic Mixture and its 3D Numerical Solution of Natural Convection in a Cup(2022) Arabian Journal for Science and Engineering.
Hekimoğlu, G., Sarı, A., Gencel, O., Tyagi, V.V.Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape-stabilized composite phase change materials(2022) International Journal of Energy Research, 46 (14), pp. 20873-20885.
Singh, G., Chopra, K., Tyagi, V.V., Pandey, A.K., Sharma, R.K., Sari, A.Estimation of thermodynamic and enviroeconomic characteristics of khoa (milk food) production unit(2022) Environment, Development and Sustainability, 24 (11), pp. 12542-12581.
Saleh, T.A., Sarı, A., Tuzen, M.Simultaneous removal of polyaromatic hydrocarbons from water using polymer modified carbon(2022) Biomass Conversion and Biorefinery.
Tyagi, V.V., Chopra, K., Sharma, R.K., Pandey, A.K., Tyagi, S.K., Ahmad, M.S., Sarı, A., Kothari, R.A comprehensive review on phase change materials for heat storage applications: Development, characterization, thermal and chemical stability(2022) Solar Energy Materials and Solar Cells, 234, art. no. 111392.
Holy, S., Temiz, A., Köse Demirel, G., Aslan, M., Mohamad Amini, M.H.Physical properties, thermal and fungal resistance of Scots pine wood treated with nano-clay and several metal-oxides nanoparticles(2022) Wood Material Science and Engineering, 17 (3), pp. 176-185.
Varol, T., Güler, O., Akçay, S.B., Aksa, H.C.Novel advanced copper-silver materials produced from recycled dendritic copper powders using electroless coating and hot pressing(2022) Powder Metallurgy.
Yalcin, E.D., Canakci, A., Erdemir, F.Wear and Mechanical Behavior of ZA27 Alloy Reinforced with B4C Produced by Powder Metallurgy Method(2022) Gazi University Journal of Science, 35 (4), pp. 1572-1583.
Vignesh, S., Jappes, J.T.W., Adam, K.M., Varol, T.Mechanical Loading and Tribological Studies on Boron Carbide (B4C) and Lead (Pb) Particles Dispersed Epoxy-Based Multilayered Composites(2022) Advances in Materials Science and Engineering, 2022, art. no. 4029882.
Çelebi, M., Çanakçı, A., Güler, O., Özkaya, S., Karabacak, A.H., Arpacı, K.A.Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing(2022) JOM, 74 (11), pp. 4449-4461.
Varol, T., Güler, O., Akçay, S.B., Çuvalcı, O.Enhancement of electrical and thermal conductivity of low-cost novel Cu–Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders(2022) Materials Chemistry and Physics, 281, art. no. 125892.
Akçay, S.B., Varol, T., Güler, O., Aksa, H.C.Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites(2022) El-Cezeri Journal of Science and Engineering, 9 (2), pp. 869-881.
Khalid, F., Saleem, M., Jabbar, H., Tanvir, M.G., Butt, M.S., Baluch, A.H., Ghaffar, A., Ahsan, M., Malik, R.A., Alver, U., Alrobei, H., Rehman, Z.D., Alzaid, M., Khan, M.Z.Improved super capacitive performance of hydrothermally developed Mn and Ni oxides along with activated carbon as ternary nanocomposite(2022) Journal of Physics and Chemistry of Solids, 161, art. no. 110467.
Için, K., Öztürk, S., Çakıl, D.D., Sünbül, S.E., Ergin, İ., Özçelik, B.Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature(2022) Materials Chemistry and Physics, 290, art. no. 126513.
Aksa, H.C., Hacısalihoğlu, İ., Yıldız, F., Varol, T., Güler, O., Kaya, G., Akçay, S.B.Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting(2022) Journal of Materials Processing Technology, 304, art. no. 117564.
Öztürk, S., Alptekin, F., Önal, S., Sünbül, S.E., Şahin, Ö., İçin, K.Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy(2022) Journal of Alloys and Compounds, 903, art. no. 163867.
Sünbül, S.E., İçin, K., Eroğlu, M., Öztürk, S.Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons(2022) Journal of Materials Engineering and Performance, 31 (4), pp. 2761-2769.
Varol, T., Güler, O., Akçay, S.B., Çolak, H.The evolution of microstructure and properties of Cu-Cr alloys synthesized via flake powder metallurgy assisted by mechanical alloying and hot pressing(2022) Materials Today Communications, 33, art. no. 104452.
-----------------------------------------------------------------------------------------------------------------
PROJECTS
2018 – 2019
Ferromanyetik Şekil Hafızalı CuAlMn Alaşımlarının Hızlı Katılaştırma Yöntemi ile Üretimi ve Özelliklerinin Geliştirilmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İCİN K., SÜNBÜL S. E. , SEZER R.
2018 – 2019
Yerli Selestit Cevherinden Mekanokimyasal Sentezleme Yöntemi ile SrFeO Esaslı Kalıcı Mıknatısların Üretimi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İCİN K., SEZER R., ÇAKIL D. D.
2018 – 2019
Katmanli Metalik Tozlar Kullanilarak Geliştirilen Yeni Tür Elektrik Kontak Malzemelerinin Üretimi Ve Karakterizasyonu
TUBITAK Project
VAROL T., GÜLER O. (Project Coordinator)
2018 - 2020
Polimer Matrisli Nano Parçacık Takviyeli Kompozit Malzemelerin Üretilmesi ve Optik ve Termal Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ALVER Ü. (Project Coordinator), GÜMÜŞKAYA E., ÇUVALCI H., ASLAN M., GÜLER O., YAZGAN A., et al.
2018 – 2020
Simetrik olarak Fonksiyonel Derecelendirilmiş HidroksiapatitZirkonyaGrafen Hibrit İmplant Malzemesinin Toz metalurjisi Yöntemi ile Üretimi
Project Supported by Higher Education Institutions
ÇANAKÇI A. (Project Coordinator), ÇUVALCI H., VAROL T., KARABACAK A. H. , ÖZKAYA S.
2018 – 2020
Zn40Al2Cu/B4C/Grafen Hibrit Kompozit Yatak Malzemelerinin Üretimi ve Tribolojik Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÇANAKÇI A. (Project Coordinator), ÇELEBİ M., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S.
2018 – 2021
Mikro Ark Oksidasyon (MAO) Yöntemiyle Alüminyum Esaslı Alaşımların Kaplanması ve Erozyon Aşınma Davranışlarının İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK B. (Project Coordinator), GEDİKLİ H., SEZER R., İCİN K., KILIÇARSLAN Y. S.
2018 – 2022
Stronsiyum Hekzaferrit Mıknatısların Yerli Selestit Cevheri Ve Tufal Kullanarak Tek Aşamada Üretimi Ve Özelliklerinin Geliştirilmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İCİN K.
2018 – 2022
MgNi Esaslı Hidrojen Depolayan Şeritlerin Üretilmesi ve Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İCİN K., SÜNBÜL S. E.
2019
2019 – 2020
CTP Esaslı Sürgülü Vana Üretimi ve Özelliklerinin İncelenmesi
Project Supported by Other Official Institutions
Aslan M., Çuvalci H., Alver Ü., Varol T., Kartal Ü.
2019 – 2020
Flor Katkılı ZnO SnO2 ve NiO Nanoparçacıkların Süperkapasitör Uygulamaları
Project Supported by Higher Education Institutions
ALVER Ü. (Project Coordinator), DURAN C., TUZCİ E.
2019 – 2020
Akımsız Kaplama ve Toz Metalürjisi Yöntemi ile Üretilen Yeni Tür Elektrik Kontak Malzemelerinin Korozyon Davranışlarının İncelenmesi
Project Supported by Higher Education Institutions
ALVER Ü. (Project Coordinator), VAROL T., GÜLER O.
2019 – 2021
Hibrit Otomobillere Uygun Nd-Fe-B Esaslı Sert (Sürekli) Mıknatısların Üretimi ve Özelliklerinin Geliştirilmesi
TUBITAK Project
Öztürk S. (Project Coordinator)
2019 – 2021
Mg(2-x)NiMx (x=at% 0,05, 0,1, 0,2; M=Fe, Ti, Ag) Alaşımlarının Eriyik Savurma Yöntemiyle Üretilmesi ve Elektrokimyasal Hidrojen Depolama Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İÇİN K., SÜNBÜL S. E. , SEZER R.
2019 – 2021
Elektrikli Araçlarda Yaygın Olarak Kullanılan Stronsiyum Hekzaferrit Mıknatısların Yerli Kaynaklarla Üretimi Ve Özelliklerinin Geliştirilmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İCİN K., SÜNBÜL S. E.
2019 - 2021
Medikal Ürün Gelişimi için Tasarım ve Üretim Süreçlerinin Kurulumu ve Geliştirilmesi
Project Supported by Higher Education Institutions
ASLAN M. (Project Coordinator), GEDİKLİ H., AYDEMİR Ö., KORKMAZ Y. T. , TÜZÜNER T., YAZAR U., et al.
2019 – 2022
Fe-Co-Cu- Oksit Nanoparçacıklarının Çözelti Yanma Senteziyle Üretimi ve Süperkapasitör Uygulamaları
Project Supported by Higher Education Institutions
ALVER Ü. (Project Coordinator), BİLGİN S., ASLAN M.
2019 – 2023
Yüksek Hassasiyetli Manyetometre Uygulamaları Için Fe-B Bazlı Camsı Metal Alaşımların Geliştirilmesi
TUBITAK Project
Öztürk S., Sözeri H.(Project Coordinator)
2019 - Continues
AA2024 esaslı Nanopartikül Takviyeli Hibrit kompozit Yatak Malzemelerinin Üretimi ve Tribolojik Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÇANAKÇI A. (Project Coordinator), ÖZŞAHİN Ş., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., et al.
2019 - Continues
Seçici Lazer Ergitme Yöntemiyle Bütünlesik ve Kendi Kendini Onaran Yeni Nesil Elektrik Kontak Malzemelerinin Gelistirilmesi
TUBITAK Project
VAROL T. (Project Coordinator), ALVER Ü., YILDIZ F.
2020
2020 – 2021
Hidroksiapitat Tozu HAp Katkılı Polilaktikasit Kompozit Filamentler Kullanılarak Elde Edilmiş 3 Boyutlu (3B) Katı Omur Modellerinin Geliştirilmesi
Project Supported by Higher Education Institutions
ASLAN M. (Project Coordinator), YERLİ H. K., ALVER Ü., EYÜBOĞLU İ., YAZAR U., ÇAVA K.
2020 - 2022
Yüksek sıcaklık endüstriyel tekerlek uygulamaları için polimer esaslı kompozit malzeme geliştirilmesi ve özelliklerinin incelenmesi
Project Supported by Higher Education Institutions
ÇUVALCI H. (Project Coordinator), KOCAMAN M.
2020-2022
BOR İÇERİKLİ NÖTRON ZIRHLAMA MALZEMELERİNİN GELİŞTİRİLMESİ
TUBITAK Project
Uzun Duran S. (Project Coordinator), Alver Ü.
2020 – 2022
Yapay Sinir Ağı Yöntemi ile Metalik Köpük Esaslı ve Fonksiyonel Kompozit Personel Zırhlama Plakalarının Geliştirilmesi
Project Supported by Higher Education Institutions
VAROL T. (Project Coordinator), ÇUVALCI H., ÇANAKÇI A., GEDİKLİ H., ERDEMİR F., ÖZKAYA S., et al.
2020 - 2023
BioBased Phase Changes Materials in Lignocellulose Matrix for Energy Store in Buildings. ERA-NET Smart Energy Systems
UFUK 2020 Project
Köse Demirel G., Temiz A. (Project Coordinator), Sarı A., Aslan M., Yıldırım İ.
2020 - Continues
FeCoCuNiXTi(0-0,5) (x=Mn, Al, Cr) Yüksek Entropili Alaşımların Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İÇİN K., SÜNBÜL S. E. , ALPTEKİN F.
2020 - Continues
Ti15Zr Dental İmplantlarda Bor Katkısının Yapısal ve Mekanik Özellikleri Üzerindeki Etkisinin Belirlenmesi
Project Supported by Higher Education Institutions
SEZER R. (Project Coordinator), İÇİN K., SÜNBÜL S. E. , ÖZTÜRK S.
2020 - Continues
Biyomedikal ve İleri Mühendislik Malzemelerinin Seçici Lazer Ergitme Yöntemi İle Üretimi
Project Supported by Higher Education Institutions
VAROL T. (Project Coordinator), ÇUVALCI H., BAYKAL S., DURAN C., ÇANAKÇI A., SARI A., et al.
2021
2021 – 2023
KTÜ'nde Geliştirilen Küp Uydunun Elektronik Kartlarının Uzay Radyasyonuna Karşı Kalifiye Edilmesi
Project Supported by Higher Education Institutions
Uzun Duran S. (Project Coordinator), ALVER Ü.
2021 – 2022
Nikel Alüminyum Bronzunun Eriyik Savurma Yöntemi ile Üretilmesi ve Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), İÇİN K., SÜNBÜL S. E. , ALPTEKİN F., AKYOL S.
2021 - 2023
Eriyik Yıgma Yöntemini Esas Alan Üç Boyutlu Yazıcı Teknolojisi Ile Yüksek Mekanik Özelliklere Sahip Sürekli Elyaf Takviyeli Termoplastik Kompozit Malzeme Üretimi
TUBITAK Project
Gümrük R. (Project Coordinator), Cora Ö. N. , Aslan M., Şimşek C.
2021 - Continues
Sürekli Elyaf Takviyeli Termoplastik Kompozitlerin Üretim Parametrelerinin Malzemelerin Yorulma Davranışına Etkisinin İncelenmesi
Project Supported by Higher Education Institutions
GÜMRÜK R. (Project Coordinator), ÇUVALCI H., CORA Ö. N. , VAROL T., ASLAN M., UZUNALİ U. Y. , et al.
2021 - Continues
TPU-PLA/Kenevir Elyaf Kompozit Malzemesinin Enjeksiyon Kalıplama ve 3B Baskı Teknolojisi ile Mekanik Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ASLAN M. (Project Coordinator), ÇAVA K., İPEK H., ALVER Ü., AYDIN M. R.
2021 - Continues
Bakır-Gümüş Alaşımlarının Akımsız Kaplama ve Sıcak Presleme Yöntemi ile Üretimi ve Karakterizasyonu
Project Supported by Higher Education Institutions
VAROL T. (Project Coordinator), ÇUVALCI H., ALVER Ü., ÇANAKÇI A., ÖZKAYA S., GÜLER O., et al.
2021 - Continues
Tabakalı Kompozit Yapılarda Modal Karakteristikler Yardımıyla Hasar Tespiti İçin Optimizasyon Tabanlı Bir Yöntem Geliştirilmesi
Project Supported by Higher Education Institutions
KAHYA V. (Project Coordinator), ŞİMŞEK S., ASLAN M., ALTUNIŞIK A. C. , TOĞAN V.
2021 - Continues
Yakıt Pili Test Sistemi Kurulumu
Project Supported by Higher Education Institutions
AYDIN Ö. (Project Coordinator), CORA Ö. N. , VAROL T., ÇUHADAROĞLU B., BALİ T.
2021 - Continues
FeB Bazlı Camsı Metal Alaşımlarının Üretimi ve Özelliklerinin İncelenmesi
Project Supported by Higher Education Institutions
ÖZTÜRK S. (Project Coordinator), AKYOL S., SÜNBÜL S. E. , İÇİN K.
2022
2022 – 2025
Yüksek Balistik Dayanım ve Radyasyon Sönümleme Özelliklerine Sahip Yeni Nesil Fonksiyonel Kompozit Zırh Plakaların Üretimi ve Karakterizasyonu
Project Supported by Higher Education Institutions
ÇANAKÇI A. (Project Coordinator), ÇUVALCI H., GEDIKLI H., YILMAZ A. H., VAROL T., ERDEMIR F., et al.
2022 - Continues
Namlu İçi Sert Krom Kaplamanın Namlu Özellikleri ve Atış Performansına Etkisinin İncelenmesi
Project Supported by Higher Education Institutions
VAROL T. (Project Coordinator), PÜRÇEK G., YANAR H., AKÇAY S. B. , YILDIZ U. T.
2022 - Continues
Metal Genleştirilmiş Grafit Karbonize edilmiş Polimer Köpük Kompozit Faz Değiştiren Malzemelerinin Isıl Enerji Depolama Amaçlı Geliştirilmesi
Project Supported by Higher Education Institutions
SARI A. (Project Coordinator), GÜLER O., KOCAMAN M., AKÇAY S. B. , ÇAKIR E., ÇANAKÇI A., et al.
Continues
FDM tipi 3 boyutlu yazıcı ile termoplastik petek/oksetik çekirdek malzeme tasarımı, üretimi ve sandviç kompozitlerde kullanım özelliklerinin araştırılması
TUBITAK Project
ASLAN M. (Project Coordinator), ALVER Ü., GEDİKLİ H.
Continues
Elektrikli Araçlarda Yaygın Olarak Kullanılan Stronsiyum Hekza Ferrit Mıknatısların Yerli Kaynaklarla Üretimi Ve Özelliklerinin Geliştirilmesi
TUBITAK Project
ÖZTÜRK S. (Project Coordinator), ÖZÇELİK B.
Continues
Çocukların Sık Tükettiği Aromalı Süt Ürünlerinin Süt Diş Minesi Üzerine Etkilerinin İn Vitro İncelenmesi
TUBITAK Project
BAYGIN Ö. (Project Coordinator), ERDEMİR F., YILMAZ N., ERBEK Ş. M.
